CUSTOM BUILDING PRODUCTS INC -- ACRYLIC MORTAR ADDITIVE, 3003  -- 5610-00N043678
<pre>=====================  Product Identification  =====================

Product ID:ACRYLIC MORTAR ADDITIVE, 3003
MSDS Date:02/26/1987
FSC:5610
NIIN:00N043678
=== Responsible Party ===
Company Name:CUSTOM BUILDING PRODUCTS INC
Address:6511 SALT LAKE AVE
City:BELL
State:CA
ZIP:90201
Country:US
Info Phone Num:213-582-0846
Emergency Phone Num:213-582-0846
Preparer's Name:TERI JAMESON
CAGE:CUSTO
=== Contractor Identification ===
Company Name:CUSTOM BUILDING PRODUCTS
Address:6511 SALT LAKE AVE.
City:BELL
State:CA
ZIP:90201
Country:US
Phone:213-582-0846
CAGE:CUSTO

=============  Composition/Information on Ingredients  =============

Ingred Name:NONHAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:NO ADVERSE EFFECTS ARE
    ANTICIPATED. EYES:MAY CAUSE SLIGHT IRRITATION.
    SKIN:PROLONGED/REPEATED CONTACT MAY CAUSE IRRITATION. ABSORPTION
    THRU SKIN IS UNLIKELY DUE TO PHYSICAL PROPERTIES OF  EMULSION.
    INGEST:SINGLE DOSE ORAL TOXICITY IS LOW. CHRONIC: NO SPECIFIC DATA
    AVAILABLE, HOWEVER, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:REPEATED EXPOSURES ARE NOT ANTICIPATED
    TO CAUSE ANY SIGNIFICANT ADVERSE PROBLEMS.
Medical Cond Aggravated by Exposure:NONE

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:
    IRRIGATE IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
     OFF WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER FOG
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FILM IS COMBUSTIBLE SIMILAR TO WOOD.
    BURNING DRY RESINS EMITS DENSE, BLACK SMOKE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH AREA WITH WATER IMMEDIATELY. AVOID
    UNNECESSARY EXPOSURE AND CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT TEMPERATURES BETWEEN 40F AND
    110F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN MOST CONDITIONS, NO RESPIRATORY PROTECTION
    SHOULD BE NEEDED, HOWEVER, IN MISTY ATMOSPHERES USE NIOSH/MSHA
    APPROVED MIST RESPIRATOR.
Ventilation:NORMAL VENTILATION IS ADEQUATE.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:WEAR CLEAN, LONG SLEEVED, BODY COVERING
    CLOTHING.
Work Hygienic Practices:GOOD HOUSEKEEPING PRACTICES SHOULD BE ENFORCED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:1.0 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:EMULSION
Appearance and Odor:MILKY WHITE LIQUID EMULSION

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ADDITION OF CHEMICALS MAY CAUSE COAGULATION.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:IF BURNED, PRODUCES CARBON MONOXIDE &
    HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS . DO NOT FLUSH INTO SEWERS. CAPTURE
    SPILLS AND BURY IN AN APPROVED LAND FILL OR BURN SOLID WASTES IN
    ADEQUATE INCINERATOR .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.