UNITED GILSONITE LABORATORIES -- UGL 222 LITE SPACKLE 244 -- 5610-00N017628
===================== Product Identification ===================== Product ID:UGL 222 LITE SPACKLE 244 MSDS Date:08/01/1989 FSC:5610 NIIN:00N017628 === Responsible Party === Company Name:UNITED GILSONITE LABORATORIES Address:JEFFERSON AVE & NEW YORK ST City:SCRANTON State:PA ZIP:18501 Country:US Info Phone Num:717-344-1202 Emergency Phone Num:717-344-1202 CAGE:12985 === Contractor Identification === Company Name:UNITED GILSONITE LABORATORIES Address:1396 JEFFERSON AVE Box:City:SCRANTON State:PA ZIP:18509 Country:US Phone:717-344-1202 CAGE:12985 ============= Composition/Information on Ingredients ============= Ingred Name:ETHYLENE GLYCOL. VP: O.06MMHG@68F. CAS:107-21-2 RTECS #:KW2975000 Fraction by Wt: <5% OSHA PEL:50 PPM, C ACGIH TLV:50 PPM, C (VAP/MIST) Ingred Name:FIBROUS GLASS;(SILICATE (AMORPHOUS)) CAS:65997-17-3 Fraction by Wt: 20% OSHA PEL:10 MG/M3 ACGIH TLV:10 MG/M3 Ingred Name:ACETIC ACID, VINYL ESTER, POLYMER;(POLY VINYL ACETATE COPOLYMER) CAS:9003-20-7 RTECS #:AK0920000 Fraction by Wt: 30% Ingred Name:WATER CAS:7732-18-5 RTECS #:ZC0110000 Fraction by Wt: 40-50% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:IN ITS WET STATE, THIS PRODUCT SHOULD NOT POSE ANY THREAT TO HEALTH DUE TO OVEREXPOSURE. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:INHALATION OF SPRAYED MATERIAL OR THE DUST FROM SANDING DRY FILM CAN AGGRAVATE RESPIRATORY CONDITION. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH IMMED WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN. TAKE TO PHYS FOR MED ATTN. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. REMOVE CONTAMD CLOTHING. CONSULT PHYS IF IRRIT PERSISTS. ING EST: DRINK 2 OR 3 GLASSES OF WATER AND SEE A PHYS. INHAL: REMOVE TO FRESH AIR. ===================== Fire Fighting Measures ===================== Lower Limits:0.9 Extinguishing Media:USE EXTINGUISHIMG MEDIA APPROPRIATE TO SURROUNDING FIRE CONDITIONS . Unusual Fire/Explosion Hazard:CONTAINERS MAY SWELL AND BURST DURING A FIRE DUE TO INTERNAL PRESSURE CAUSED BY HEAT. THIS MAY MAKE FOR A SLIPPERY CONDITION ON FLOORS. ================== Accidental Release Measures ================== Spill Release Procedures:DIKE AREAS AROUND SPILL. APPLY ABSORBANT MATERIAL, THEN SWEEP UP AND PLCAE IN PROPER CONTAINERS. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP FROM FREEZING. STORE MATERIAL IN AREA WHERE TEMPERATURE RANGES FROM 50F-90F. DO NOT STACK CONTAINER MORE THAN THREE HIGH. Other Precautions:AS W/ANY CHEM PROD, YOU SHOULD ADEQUATELY EVALUATE ITS POTNTL HAZ W/RESPECT TO THE ENVIRONMENT WHERE IT WILL BE USED. METH OF USE & INDIVIDUAL MFG PROC SHOULD BE ANALYZED BEFORE USE OF PROD. IF YOU HA VE ANY QUESTIONS CONTACT MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WHEN SPRAYING OR SANDING DRY FILM, USE NIOSH/MSHA APPROVED RESPIRATOR FOR DUST PARTICLES. Ventilation:PROVIDE ADEQUATE VENTILATION THAT ALLOWS FOR CONSTANT INCOMING OF FRESH AIR AND REMOVAL OF CONTAMINATED AIR. Protective Gloves:NEOPRENE RUBBER GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING, OR USING THE WASHROOM. WASH CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:212F,100C Vapor Pres:SEE INGRED Vapor Density:>AIR Evaporation Rate & Reference:SLOWER THAN ETHER Appearance and Odor:NONE SPECIFIED BY MANUFACTURER. Percent Volatiles by Volume:29.0 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Stability Condition to Avoid:TEMPERATURES BELOW 50F. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF ON APPROVED SITES ACCORDING TO LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT CONTAMINATE STREAMS OR OTHER WATER SOURCES WITH THIS PRODUCT. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.