FISKE BROTHERS REFINING CO -- LUBRIPLATE FMO-350(AEROSOL)  -- 9150-00N041036
<pre>=====================  Product Identification  =====================

Product ID:LUBRIPLATE FMO-350(AEROSOL)
MSDS Date:02/01/1992
FSC:9150
NIIN:00N041036
=== Responsible Party ===
Company Name:FISKE BROTHERS REFINING CO
Address:129 LOCKWOOD ST
City:NEWARK
State:NJ
ZIP:07105
Country:US
Info Phone Num:201-589-9150
Emergency Phone Num:201-589-9150
Preparer's Name:ROBERT J. SIBILIA
CAGE:9N579
=== Contractor Identification ===
Company Name:FISKE BROS REFINING CO
Address:129 LOCKWOOD ST
Box:City:NEWARK
State:NJ
ZIP:07105-4720
Country:US
Phone:201-589-9150
CAGE:73219
Company Name:FISKE BROTHERS REFINING CO
Address:1500 OAKDALE AVE
Box:City:TOLEDO
State:OH
ZIP:43605
Country:US
Phone:419-691-2491
CAGE:9N579

=============  Composition/Information on Ingredients  =============

Ingred Name:OIL MIST
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 20%
OSHA PEL:1000 PPM
ACGIH TLV:SIMPLE ASPHYXIANT

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL IS MOST LIKELY METHOD OF
    EXPOSURE. MINIMAL EFFECTS ARE EXPECTED AT LEVELS BELOW TLV OF
    COMPONENTS. DIZZINESS, DROWSINESS, COUGHING, NASAL OR THROAT
    IRRITATION @ HIGHER LEVELS. PROPANE MAY ACT AS  A SIMPLE ASPHYXIANT
    W/OUT OTHER SIGNIFICANT PHYSIOLOGICAL EFFECTS IF OXYGEN CONTENT IS
    LOW.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED,
    ADMINISTER ARTIFICIAL RESPIRATION. GET MEDICAL HELP IMMED. EYES:
    FLUSH WITH CLEAR WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
    PERSISTS, CONSULT A  PHYSICIAN. SKIN: REMOVE CONTAMINATED CLOTHING
    AND WASH THORO WITH SOAP AND WATER. INGEST: DO NOT INDUCE VOMITING.
    CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:<0F,<-18C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . KEEP CONTAINER COOL. USE SHIELDING TO
    PROTECT PERSONNEL AGAINST BURSTING CONTAINERS.
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME. AT ELEVATED
    TEMPERATURES (OVER 130F), AEROSOL CONTAINERS MAY VENT,
    BURST/RUPTURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGNITION, VENTILATE AREA.
    USE APPROPRIATE SAFETY EQUIPMENT TO ENTER AREA. ALLOW TIME FOR
    VAPORS TO BE BELOW THEIR TLV. ADD OIL ABSORBENT AND CLEAN AREA.
    KEEP PETROLEUM PRODUCTS OUT O F SEWERS AND WATER COURSES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY AREA OUT OF DIRECT
    SUNLIGHT. DO NOT PUNCTURE OR INCINERATE, OR HEAT FULL OR EMPTY
    CONTAINERS ABOVE 130F.
Other Precautions:PLEASE READ AND FOLLOW THE DIRECTIONS ON PRODUCT
    LABEL. KEEP AWAY FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NEED NIOSH/MSHA APPROVED ORGANIC VAPOR MASK IF
    TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST: USE FOR FUMES & TO MAINTAIN BELOW TLV VALUE.
Protective Gloves:OIL-IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKER (SUPDAT)
Other Protective Equipment:USE OIL-RESISTANT APRON, IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP: 105PSIG@130F. EYE PROT: GOGGLES AND FUL LENGTH FACESHIELD .

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:SPRAY
Vapor Pres:SUPP DATA
Vapor Density:>1
Spec Gravity:0.88(H*2O=1)
Evaporation Rate &amp; Reference:FASTER(BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:OFF-WHITE MIST W/ODOR OF PROPANE FROM AEROSOL CAN

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:AVOID SPRAYING INTO OPEN FLAMES OR ONTO
    RED HOT SURFACES.
Hazardous Decomposition Products:MAY FORM CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS. GIVE
    EMPTY, LEAKING, OR FULL CONTAINERS TO A DISPOSAL SERVICE EQUIPPED
    TO SAFELY HANDLE AND DISPOSE OF PRESSURIZED CONTAINERS. DISPOSE OF
    I/A/W FEDERAL, STATE  AND LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.