ILLINOISE BRONZE PAINT COMPANY(ACE HARDWARE) -- ACE RUST STOP(ALL COLORS) -- 8010-00B090002
===================== Product Identification ===================== Product ID:ACE RUST STOP(ALL COLORS) MSDS Date:12/01/1983 FSC:8010 NIIN:00B090002 === Responsible Party === Company Name:ILLINOISE BRONZE PAINT COMPANY(ACE HARDWARE) Address:300 E. MAIN STREET City:LAKE ZURICH State:IL ZIP:60047 Country:US Info Phone Num:312438-8201 Emergency Phone Num:312359-6433 CAGE:DO868 === Contractor Identification === Company Name:ILLINOIS BRONZE PAINT COMPANY Address:300 EAST MAIN STREET City:LAKE ZURICH State:IL ZIP:60047-2580 Country:US Phone:800-228-5635 CAGE:91794 Company Name:ILLINOISE BRONZE PAINT COMPANY(ACE HARDWARE) Address:300 E. MAIN STREET Box:City:LAKE ZURICH State:IL ZIP:60047 Country:US Phone:312438-8201 CAGE:DO868 ============= Composition/Information on Ingredients ============= Ingred Name:MINERAL SPIRITS Fraction by Wt: 5-10% OSHA PEL:500 PPM Ingred Name:TOLUENE (SARA III) CAS:108-88-3 RTECS #:XS5250000 Fraction by Wt: 3-10% OSHA PEL:200 PPM/150 STEL ACGIH TLV:50 PPM; 9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:VM&P NAPHTHA CAS:8032-32-4 RTECS #:OI6180000 Fraction by Wt: 5.0% OSHA PEL:500PPM Ingred Name:METHYLENE CHLORIDE (SARA III) CAS:75-09-2 RTECS #:PA8050000 Fraction by Wt: 34.0% OSHA PEL:500 PPM/C,1000; Z2 ACGIH TLV:50 PPM, A2; 9192 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:PROPELLANT (PROPANE-ISOBUTANE) Fraction by Wt: 34.0% Ingred Name:INERT RESINS & PIGMENTS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Effects of Overexposure:INHALATION:ANESTHETIC.IRRITATION OF THE RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION EVIDENCED BY HEADACHE,DIZZINESS,STAGGERING GAIT,CONFUSION,UNCONSCIOUSNESS OR COMA.SKIN OR EYE CONTACT:PRIMA RY IRRITANT. ======================= First Aid Measures ======================= First Aid:INHALATION:REMOVE TO FRESH AIR.RESTORE BREATHING.TREAT SYMPTOMATICALLY.EYE CONTACT:FLUSH IMMED.W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN.GET MEDICAL ATTENTION.SKIN:WIPE OFF W/TOWEL.REMOVE REMAINDER WITH MINERAL SPIRITS,TURPENTINE OR LACQUER THINNER.WASH WITH SOAP AND WATER.REMOVE CONTAMINATED CLOTHING. ===================== Fire Fighting Measures ===================== Flash Point:-40C Lower Limits:0.8% Extinguishing Media:FOAM,CO2,DRY CHEMICAL Unusual Fire/Explosion Hazard:CANS WILL RUPTURE FROM INTERNAL PRESSURE AT ABOUT 190F AND DISCHARGE FLAMMABLE CONTENTS.WHEN HEADED TO DECOMPOSITION,TOXIC FUMES ARE FORMED. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES,HOT SURFACES).AVOID BREATHING VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS 1A FLAMMABLE LIQUIDS. Other Precautions:DO NOT SPRAY IN EYES.DO NOT PUNCTURE OR INCINERATE CANS.DO NOT STICK PIN OR ANY OTHER SHARP OBJECT INTO OPENING OF CAN.FINGER MUST NOT PROTRUDE OVER SPRAY CAN. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:FOR CASUAL USE NONE REQUIRED,PROVIDED VENTILATION IS AVAILABLE. Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENTILATION. Protective Gloves:NONE Eye Protection:NO SPECIAL PROTECTION REQUIRED. Other Protective Equipment:NONE Supplemental Safety and Health ================== Physical/Chemical Properties ================== Vapor Density:HEAVIER Percent Volatiles by Volume:90% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES Hazardous Decomposition Products:HYDROGEN CHLORIDE,CARBON MONOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.DO NOT INCINERATE CLOSED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.