LINDSAY FINISHES -- LUSTRE KOTE -- 8010-00F004127
===================== Product Identification ===================== Product ID:LUSTRE KOTE MSDS Date:01/01/1987 FSC:8010 NIIN:00F004127 === Responsible Party === Company Name:LINDSAY FINISHES/MADISON, WI 53704 Emergency Phone Num:(608) 249-6434 CAGE:LINDS === Contractor Identification === Company Name:LINDSAY FINISHES, INC. Address:1898 E. JOHNSON STREET City:MADISON State:WI ZIP:53704 Phone:(608) 249-6434 CAGE:LINDS ============= Composition/Information on Ingredients ============= Ingred Name:BARIUM SULFATE CAS:7727-43-7 RTECS #:CR0600000 OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST; 9293 Ingred Name:TITANIUM DIOXIDE CAS:13463-67-7 RTECS #:XR2275000 OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST; 9293 ===================== Hazards Identification ===================== Effects of Overexposure:HEADACHE/NAUSEA/IRRITATION OF NOSE/THROAT/LUNGS. SKIN: IRRITATION/DERMATITIS. EYE: IRRITATION. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINUTES. CALL A PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH W/SOAP & WATER. WASH CLOTHING BEFORE REUSE. INGESTION: IF THE PERSON IS CONSCIOUS, GIVE 2 CUPS OF WATER AND INDUCE VOMITING. SEE A PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:211 (TCC) Lower Limits:1% Upper Limits:19.4 Extinguishing Media:DRY CHEMICAL, CO2, FOAM, ALCOHOL FOAM Fire Fighting Procedures:WATER COOL CONTAINERS. WEAR SCBA/PROTECTION FOR SKIN/EYES. ================== Accidental Release Measures ================== Spill Release Procedures:DIKE SPILL TO MINIMIZE CONTAMINATION. ABSORB WITH INERT MATERIAL. COLLECT IN CONTAINS. KEEP SPILL OUT OF WATERWAYS. ====================== Handling and Storage ====================== Handling and Storage Precautions:AVOID PROLONGED CONTACT WITH LIQUID AND/OR VAPOR. KEEP FROM FREEZING. Other Precautions:NEVER TAKE INTERNALLY. WASH THOROUGHLY AFTER HANDLING. ============= Exposure Controls/Personal Protection ============= Ventilation:MECHANICAL: ADEQUATE Protective Gloves:IMPERVIOUS Eye Protection:GOGGLES Supplemental Safety and Health MSDS DATE: 18 JUN 1986. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:212F Vapor Pres:17 Vapor Density:6.07 Spec Gravity:1.26 Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:APPRECIABLE Appearance and Odor:LIQUID COATING WITH MILD ODOR. Percent Volatiles by Volume:27% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES AVOID PEROXIDES/STRONG OXIDIZING AGENTS Stability Condition to Avoid:EXPLOSIVE PEROXIDES FORM AT 212F Hazardous Decomposition Products:UNDER HEAT, CO2, CO MAY BE PRODUCED ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.