BENJAMIN MOORE & CO -- MOORECRAFT LATEX SEMI-GLOSS ENAMEL, 276 -- 8010-00N017393
=====================  Product Identification  =====================

Product ID:MOORECRAFT LATEX SEMI-GLOSS ENAMEL, 276
MSDS Date:11/02/1993
FSC:8010
NIIN:00N017393
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:09585
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Ingred Name:CLAY, KAOLIN; (HYDROUS ALUM SILICATES (F*)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 6.8%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9495

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 18.9%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9495

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF THE
    RESPIRATORY TRACT. SKIN AND EYES: PRIMARY IRRITATION. INGESTION:
    INGESTION OF LARGE AMOUNTS COULD CAUSE SERIOUS INJURY. CHRONIC:
    NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN
    ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. GET MEDICAL HELP FOR ANY
    BREATHING DIFFICULTY. EYE: FLUSH THOROUGHLY WITH WATER FOR AT LEAST
    15 MINUTES. CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER.
    INGESTION: DRI NK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
    VOMITING. CAL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS.
Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH
    SKIN OR BREATHING OF SPRAY MIST OR SANDING DUST. CLOSE CONTAINER
    AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
    INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR SPECIFIED FOR
    PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED
    OR CONFINED AREAS.
Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV & LEL
    (SEE INGREDIENT DATA AND CONCENTRATIONS). MECHANICAL (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
    HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
% VOLAT: 66.7-69.2. VENT: EXHAUST MAY BE REQUIRED IN CONFINED AREAS.

==================  Physical/Chemical Properties  ==================

Vapor Density:HVR/AIR
Spec Gravity:1.09-1.24(F PN)
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORSEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.