MINWAX ® Tung Oil Finish
Manufacturer Information
Name
MINWAX Company
Address
10 Mountainview Road
Upper Saddle River, NJ 07458
Phone
(216) 566-2917
Effective Date
2016-12-01
Pictogram
--
NFPA
HMIS
Health |
|
Flammability |
|
Physical Hazard |
|
Personal Protection |
|
Signal Word
None
Hazard Statements
Precautionary Statements
- Use only with adequate ventilation. Avoid contact with skin and eyes. Avoid breathing vapor and spray mist. Wash hands after using. This coating may contain materials classified as nuisance particulates (listed "as Dust" in Section 2) which may be present at hazardous levels only during sanding or abrading of the dried film. If no specific dusts are listed in Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3 mg/m3 (respirable fraction), OSHA PEL 15 mg/m3 (total dust), 5 mg/m3 (respirable fraction). Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
Wausau School District Local data
- SKU #
*This local data is shared by all revisions
